Model: Uty-Rsku - Fujitsu Airstage J-II Series Design & Technical Manual

2-7-2. MODEL: UTY-RSKU

F
„ FUNCTIONS
„
4
6
Display panel
7
10
*1 : "AUTO " is not available for a heat pump model unless it is set up master indoor unit.
*2 : "FAN " is not available for a heat pump model
*3 : "HEAT " is not available for a cooling only model
*4 : during Error code history display mode.
*5 : during address display mode.
*6 : during self Diagnosis mode.
● Easy operation.
● Built-in background light function.
● Easy installation with a slim shape with no bulge in the back.
● Error history. (Last 16 error codes can be accessed.)
● Up to 16 indoor units can be simultaneously controlled.
● Can be installed onto SW-BOX. (applies to European and other
country's standard)
2
3
1
5
9
8 13
11
12
1 START/STOP button
Pressed to start and stop operation.
2 Display with backlight
Lights during operation.
3 Operation lamp
Lights during operation.
4 Fan control button
Selects the fan speed
5 Set temperature button
Selects the setting temperature.
6 Operation mode button
Selects the operating mode
7 Standby display
Indicates during the oil recovery and defrosting operation.
8 Power source display
Indicates the main power ON.
9 Central control display
Indicates when function is locked from Touch Panel Controller or
System Controller.
10 Fan speed display
(AUTO
11 Set temperature
Indicates Error history number. *4
Indicates Indoor unit address. *5
12 Operating mode display
13 (Upper) Indicates the error code *4 *6 / the refrigerant
system address. *5
(Lower) Indicates the remote controller address. *4 *5 *6
- (05 - 74) -
, HIGH , MED , LOW
( A U TO * 1 , C O O L , D RY
FAN * 2, HEAT * 3).
).
,