Fujitsu Airstage J-II Series Design & Technical Manual page 789

2-21. DUCT STATIC PRESSURE SETTING
„ MODEL: ARUL4TLAV1
„
„ MODELS: ARUL7TLAV, ARUL9TLAV, ARUL12TLAV, ARUL14TLAV,
„
ARUL18TLAV
„ MODELS: ARUM24TLAV, ARUM30TLAV, ARUM36TLAV
„
„ MODELS: ARUH72TLAV1, ARUH96TLAV
„
Change the airflow setting when the external static pressure is different than the default static
pressure.
Static pressure setting can be performed using: wireless remote controller, wired remote
controller, and simple remote controller.
How to set airflow (external static pressure)
● Wireless remote controller
„
Airflow is set by function number 26 (static pressure).
Refer to "BUTTON NANE AND FUNCTION", "FUNCTION SETTING" and "FUNCTION
DETAILS" in 2-3. INDOOR UNIT (setting by wireless remote controller).
● Wired remote controller
„
Airflow is set by function number 26 (static pressure).
Refer to "BUTTON NANE AND FUNCTION", "FUNCTION SETTING" and "FUNCTION
DETAILS" in 2-4. INDOOR UNIT (setting by wired remote controller).
● Simple remote controller
„
Airflow is set by function number 26 (static pressure).
Refer to "BUTTON NANE AND FUNCTION", "FUNCTION SETTING" and "FUNCTION
DETAILS" in 2-5. INDOOR UNIT (setting by simple remote controller).
● Wired remote controller (Touch panel)
„
Airflow is set by function number 26 (static pressure).
Refer to "FUNCTION SETTING" and "FUNCTION DETAILS" in 2-6. INDOOR UNIT (setting
by wired remote controller [Touch panel]).
● FAN PERFORMANCE CURVE
„
Refer to "7. FAN PERFORMANCE CURVE" in Chapter 4.
● If airflow is set incorrectly, unit may perform incorrectly; insufficient airflow or condensate
carry-over (water leakage) are possible.
NOTE
- (07 - 142) -