Fujitsu Airstage J-II Series Design & Technical Manual page 476

„ GROUP
„
This function is used when operating a multiple number of remote controller group at a time
from the System Controller or Touch Panel Controller or Central Remote Controller.
z Example
„
Refrigerant
system 1
Heat
Recovery
system
A
B
C
Refrigerant
system 2
Heat pump
system
System
D
controller
Group A: "Group" is possible with only one indoor unit
Group B:"Group" is possible with spanning the RB groups.
Group C:"Group" is possible with spanning the RB group and indoor unit of cooling only type.
Group D:"Group" is possible with spanning the refrigerant systems.
● The contents of a setting may not be reflected by operational status.
(B, C, D group)
- (05 - 113) -