Fujitsu Airstage J-II Series Design & Technical Manual page 517

„ CONTROL AND MONITORING ITEMS WITH OBJECT TYPES
„
NOTE: For detailed information, check the Instruction Manual.
Function Name
Operation Setting
Operation Mode
Temperature Setting
Fan Speed
R/C Prohibition
Gateway
Representative Error
Error Code
Energy Saving Status / Setting
Existence Check
Temperature Status / Setting
Operation Status / Setting
Operation Mode Status /
Setting
Fan Speed Status / Setting
Suction/Room Temperature
Representative Error
Error Code
Temperature H/L Limit Status
/ Setting
Temperature Limit Validity
Status / Setting
Filter Sign Status / Reset
Forced Thermo Off Status /
Setting
Emergency Stop
R/C Prohibition Status /
Setting
Vertical Fan Status / Setting
Horizontal Fan Status / Setting
Outdoor Unit Save Status /
Setting
Low Noise Operation Status /
Setting
Representative Error
Error Code
Forced Off Status / Setting
*: Bacnet Object Type
BI: OBJECT_BINARY_INPUT
BO: OBJECT_BINARY_OUTPUT
MI: OBJECT_MULTISTATE_INPUT
MO: OBJECT_MULTISTATE_OUTPUT
AI: OBJECT_ANALOG_INPUT
AO: OBJECT_ANALOG_OUTPUT
D: OBJECT_DEVICE
Notification object shall be required to support intrinsic reporting.
Category Bacnet Object
Target Monitor Control
Bat - ○
Bat - ○
Bat - ○
Bat - ○
Bat - ○
GW ○ -
GW ○ -
GW ○ -
GW ○ ○
In ○ -
In ○ ○
In ○ ○
In ○ ○
In ○ ○
In ○ -
In ○ -
In ○ -
In ○ ○
In ○ ○
In ○ ○
In ○ ○
In ○ -
In ○ ○
In ○ ○
In ○ ○
Out ○ ○
Out ○ ○
Out ○ -
Out ○ -
Out ○ ○
- (05 - 154) -
Remark
Type 1
BO
MO
AO
MO
MO
D No monitor/control difference
BI Gateway, Lon communication
Gateway, Lon communication.
Error Codes to signal gateway status
MI
will be agreed with FGL during
development.
BI / BO
BI
AI / AO
BI / BO
MI / MO
MI / MO
AI
BI
MI
H/L limit per 3 operation Mode:
AI / AO
HEAT, COOL-DRY and AUTO
BI / BO
BI / BO Only reset for control
BI / BO
BI
MI / MO
MI / MO
MI / MO
MI / MO
MI / MO Monitor not supported by all
BI
MI
BI / BO