Fujitsu Airstage J-II Series Design & Technical Manual page 678

z Refrigerant circuit address setting
„
12) Touch the [Address] on the "Function
Setting" screen.
Function Setting
Address
Function No.
Setting No.
Back
14) Touch the [Function No.] on the "Function
Setting" screen.
Function Setting
Address
Function No.
Setting No.
Back
16)Touch the [Setting] on the "Function
Setting" screen.
Function Setting
Address
Function No.
Setting No.
Back
18) Touch the [YES] of the verification screen.
Function Setting
Function setting will be performed. OK?
No
After the "Setting" screen was displayed,
the display returns to the "Function Setting"
screen.
13) "Address" screen is displayed. Select the
[002–01]
[00]
[00]
Setting
When the [OK] is touched, the display returns
to the "Function Setting" screen.
15) "Function No." screen is displayed. Set the
[002–01]
[00]
[00]
Setting
When the [OK] is touched, the display returns
to the "Function Setting" screen.
17) Setting screen of "Setting No." is displayed.
[002–01]
[02]
[00]
Setting
Ex.) When refrigerant circuit address data "18" is set up
When the [OK] is touched, the "Function Setting"
verification screen is displayed.
Yes
- (07 - 31) -
address of the indoor unit whose function
number is to be set by touching [▲] or [▼].
When setting at all the indoor units, touch
[All].
Address
All
002–01
Cancel OK
Function No"02". with the [▲] or [▼].
Function No.
02
Cancel OK
Set the Setting No. with the [▲] or [▼].
(The setting range is from 00 to 99.)
Function Setting
Address
Function No.
Setting No.
18
Cancel OK
[002–01]
[02]