Fujitsu Airstage J-II Series Design & Technical Manual page 738

„ BUTTON NAME AND FUNCTION
„
● During address setting mode, indoor unit reject the any operation command from remote controller.
MODE button
- Start the function setting mode
- Changes the display digits
START/STOP button
Transmits function setting
TIMER set (-) button
Reconfirmation of function setting.
TIMER set (+) button
Confirmation of function setting.
IR RECEIVER UNIT
Indication of function number (the ten's place)
Indication of function number (the one's place)
Indication of setting number (0-9)
Long press ----- Switches between the function setting mode and
(3 sec more)
Short press ----- Switches the indicator display
OPERATION LAMP
TIMER LAMP
FILTER LAMP
MANUAL/AUTO button
the function setting complete mode.
- (07 - 91) -
Function number
Refer to FUNCTION DETAILS
Setting number
Refer to FUNCTION DETAILS
FAN button
Switches between the setting number (bottom line)
and function number (top line)
SET TEMP. " p " and " q " button
Increases and decreases the displayed number
MANUAL
AUTO