Fujitsu Airstage J-II Series Design & Technical Manual page 533

„ PERSONAL COMPUTER SYSTEM REQUIREMENTS
„
• Microsoft
• Microsoft
• Microsoft
• Microsoft
Operating system
• Microsoft
• Microsoft
[Supported languages]
English, Chinese, French, German, Russian, Spanish, and Polish
®
CPU Intel Core
Memory • 2 GB or more (for Windows Vista
• 4 GB or more (for Windows
HDD 40 GB or more of free space
Display 1,024 × 768 or higher resolution
• Ethernet port (for getting access to the Internet using LAN)
• USB ports (Maximum of 5 ports)
Interface - 1 USB port is required for WibuKey connection
- Maximum of 4 USB ports are required for Echelon
* Maximum number of required USB ports depends on the applicable system configurations
Software Adobe
Optical drive DVD-ROM Drive
„ INSTALLATION PROCEDURE
„
Before beginning installation, connect to the VRF Network System using the USB adapter.
Installation steps in brief are as follows:
(For detail, check the Installation Manual and the Operation Manual)
Step1: Install the driver for USB Adaptor to PC
*in this stage, do not connect the USB Adaptor to PC
Step2: Install the BACnet
Step3: Restart PC.
Step4: After PC restart, make sure that the USB Adaptor, WIBU-KEY and Ethernet cable for
the BACnet
Step5: Startup the application.
Step6: Input all necessary initial setting items like, IP Address, and others. After that, click the
OK button. USB Adaptor setting screen pops up automatically, select the connected
adaptor and click OK button. After that, unit register screen appears automatically,
scanning all connected units and click OK button. Complete the startup operation if
Gateway execution screen appears on PC screen.
Step7: Arrange the information between BMS and BACnet
Service and so on.
® Windows ® 7 Home Premium (32-bit or 64-bit) SP1
® ®
Windows 7 Professional (32-bit or 64-bit) SP1
® Windows ® 8.1 (32-bit or 64-bit)
® ®
Windows 8.1 Pro (32-bit or 64-bit)
® Windows ® 10 Home (32-bit or 64-bit)
® ®
Windows 10 Pro (32-bit or 64-bit)
TM
i3 2-GHz or higher
®
®
7 [64-bit], Windows
® ®
Reader 9.0 or later
®
Gateway (Application Software) to PC
®
Gateway are connected to PC
- (05 - 170) -
®
and Windows 7 [32-bit])
®
8.1, and Windows
®
U10 USB Network Interface
®
Gateway using the Read Property
®
10)