Fujitsu Airstage J-II Series Design & Technical Manual page 773

„ WHEN MANUAL ADDRESS SETTING NUMBER IS RESET
„
1) Touch the [Address Reset] on the
"R.C.Address Setting" screen.
R.C.Address Setting
Current Address
Manual Addressing
Address Reset
3) When the [Close] on the message screen
is touched, the display returns to the
"R.C.Address Setting" screen. Turn on the
power again.
R.C.Address Setting
Setting is reflected after the power is
turned on again.
[001–05]
Back
Close
- (07 - 126) -
2) A verification screen is displayed. When the
[Yes] is touched, a verification screen is
displayed.
R.C.Address Setting
The address will be returned to factory
setting. OK?
No Yes