Fujitsu Airstage J-II Series Design & Technical Manual page 734

z SW1 setting
„
●Remote controller wire type setting switch
SW1 Remote controller wire type
2WIRE
u
3WIRE
„ ROTARY SWITCH SETTING
„
z IU AD setting
„
●Indoor unit address switch
Sets the indoor unit addresses.
Refer to "1-3. MANUAL ADDRESS SETTING METHOD" for indoor unit address conversion
table.
INDOOR UNIT ADDRESS SWITCH
Rotary SW
IU AD x 1
IU AD x 10
z REF AD setting
„
●Refrigerant circuit address switch
Sets the refrigerant circuit address.
Refer to "1-3. MANUAL ADDRESS SETTING METHOD" for refrigerant circuit address
conversion table.
REFRIGERANT CIRCUIT ADDRESS SWITCH (Factory setting REF AD x 1: 0, REF AD x 10: 0)
Rotary SW
REF AD x 1 Refrigerant circuit address Switch 1
REF AD x 10 Refrigerant circuit address Switch 2
(u...Factory setting)
2 Wire type
3 Wire type
Description
Indoor unit address Switch 1
Indoor unit address Switch 2
Description
- (07 - 87) -
(Factory setting IU AD x 1: 0, IU AD x 10: 0)
Remarks
Indoor unit address (the first digit)
Indoor unit address (the second digit)
Remarks
Refrigerant circuit address (the first digit)
Refrigerant circuit address (the second digit)