Fujitsu Airstage J-II Series Design & Technical Manual page 536

z Filter mode setting
„
Set the Filter mode to suppress an increase of the amount of communication information in the VR-II system.
● Filter mode is turned on by inserting the accessory connecting wire at the CN4 connector on the PCB.
● When the Filter mode setting is changed, turn the power off once. Otherwise, the setting will not be recognized.
CN4
„ DIMENSIONS
„
Ø1-1/8 (28)
For dust proof
bushing
4 - Ø3/16 (5) For M4x20mm screws
Connecting wire (Accessory)
Body
PCB
3-1/2 3-1/2
(89.5) (89.5)
Ø7/8 (22.2) For conduit
9-1/2 (241.6)
10-11/16 (272) Hole pitch
11-5/16 (288)
- (05 - 173) -
Unit: in. (mm)
Ø 1-1/8(28)
For dust proof bushing
2-Ø5 (3/16)
For M4x20mm
screws
2-5/8
(67)