Fujitsu Airstage J-II Series Design & Technical Manual page 537

„ PACKING LIST
„
The following installation parts are supplied. Use them as required.
Name and shape
Installation manual
Cable Tie
Screw
(M4 × 20 mm)
Terminal resistor
Dust proof bushing
Connecting wire
„ WIRING SPECIFICATIONS
„
Use
Maximum
Power supply cable
Minimum
Transmission cable
Fuse capacity
„ SPECIFICATIONS
„
z Main specification
„
Power supply
Input Power (W)
Temperature: °F (°C)
Humidity (%)
Dimensions [H × W × D]: in. (mm)
Weight: lbs. oz. (g)
Quantity
1
4
4
1
1
1
Size
16 AWG
2
(1.25 mm )
60245 IEC 57 or equivalent
20 AWG
2
(0.5 mm )
LEVEL4 (NEMA) non-polar 2
22AWG
core, twisted pair solid core
(0.33 )
mm 2
3 A
1ø AC 208 - 240 V 50/60 Hz
Operating
Packaged
Packaged
2-5/8 × 11-5/16 × 8-5/16 (67 × 288 × 211)
- (05 - 174) -
Application
For securing controller cable.
For mounting the signal amplifier.
For connecting the power supply cable. (Except in
U.S.A. and Canada)
For setting the filter mode
Wire type
1 ø AC 208 - 240 V 50/60
Hz, 2 Wire + ground
(Always ground the unit)
L
ON
Shielded
4.5
32 to 114.8 (0 to 46)
14 to 140 (-10 to 60)
0 to 95 (RH) ;
No condensation
3 lbs. (1,500)
Remarks
®
W compatible cable
ORKS