Fujitsu Airstage J-II Series Design & Technical Manual page 660

z Touch panel controller setting (Set G)
„
NOTE: Set Touch panel controller address first, to conduct the initial setting of it.
Refer to the "setting manual" for details.
*1 : The total of the Touch panel controller, Central remote controller and Network convertor for L
maximum of 16.
z Network convertor setting (Set H)
„
NOTE: Set the Rotary SW 110 and SW 111 on network convertor PCB.
*1 : When connecting the Network convertor for Single split AC , set up the number so that the Refrigerant circuit
address number of outdoor unit and indoor unit does not overlap .
And the sum total of the Refrigerant circuit address of Network convertor for Single split AC and the Refriger-
ant circuit address of the outdoor unit and the indoor unit is a maximum of 100.
00
Touch panel controller (Max. 16) *1
51
Network
convertor for
Single split AC
(Max.100) *1
- (07 - 13) -
01 02 03
Single split AC
W ® is a
ON ORKS