Save And Reset Preferences - Keysight N9912A User Manual

How to view and change Preference Quick Settings
 Press System 7
 Then
 Then
 Press
 To change a setting:
 To exit the editing session without saving changes, press Esc at any time.
Learn more about these preference settings:

Save and Reset Preferences

All preference settings can be made at one time from the Quick Settings table.
All settings that can be saved as preferences (except Battery Saver) can also be
made from individual softkey selections throughout the FieldFox menu structure.
However, they ONLY remain set through a FieldFox shutdown when the current
settings are saved as preferences.
 The table above shows a list of all of these settings and where they are discussed
in this User's Guide.
How to save current settings as Preferences
 Using softkeys, configure the settings as you would like them to remain.
 Press System 7
 Then
System Settings
Preferences
Preferences
and
Next Page Previous Page
Use the ▲|▼ arrows to highlight a setting.
o
Then press Edit. The current setting changes to
o
Some settings require you to press a softkey to change the value. Otherwise, use
o
the numeric keypad, ▲|▼ arrows, or rotary knob to change the value.
When finished changing a value, press
o
When finished changing ALL preferences, press Done. All changes are
o
immediately saved as Preferences.
Setting
Language
Display Settings
Audio
Date and Time
GPS
CAT Distance Units
Battery Saver
Preferences
to view all settings.
yellow.
Done Edit
Learn more...
on page 176
on page 172
on page 171
on page 181
on page 178
on page 36
on page 176
175