Language; Startup Mode; Battery Saver - Keysight N9912A User Manual

 Then
 Press

Language

Choose the language in which to display FieldFox softkeys and other messages.
How to select a Language
 Press System 7
 Then
 Then
 Then choose from the following:

Startup Mode

The Startup Mode setting determines the mode that becomes active (visible) when
User Preset is set to OFF (Factory Preset) and the FieldFox is powered ON. Learn
more about User Preset on page 171.
How to set Startup Mode
 Press System 7
 Then
 Then
 Then scroll to Startup Mode and press Edit.
 Then repeatedly press the

Battery Saver

When the battery saver is OFF, the source power is left ON at the end of the sweep
which consumes more power. This feature is used in CAT, NA and VVM modes.
How to set Battery Saver
 Press System 7
176
Save Current Settings
saved.
Reset Preferences
Preferences
Language
English
o
– Spanish
Espanol
o
– German
Deutsch
o
– Italian
Italiano
o
– French
Francais
o
Russian
o
Japanese
o
Chinese
o
Turkish
o
Preferences
Preferences
is the factory default mode for your FieldFox model.
<Default>
o
Built-in Power Meter Mode is NOT allowed as a Startup Mode.
o
There is a beep when your settings have been
to restore the factory default settings.
to scroll through the available choices.
Startup Mode
FieldFox User's Guide