Save And Reset Preferences; Language - Keysight N9923A FieldFox User Manual

 Press
 To change a setting:
 To exit the editing session without saving changes, press Esc at any time.
Learn more about these preference settings:

Save and Reset Preferences

All preference settings can be made at one time from the Quick Settings table.
All settings that can be saved as preferences (except Battery Saver) can also be
made from individual softkey selections throughout the FieldFox menu structure.
However, they ONLY remain set through a FieldFox shutdown when the current
settings are saved as preferences.
 The table above shows a list of all of these settings and where they are discussed
in this User's Guide.
How to save current settings as Preferences
 Using softkeys, configure the settings as you would like them to remain.
 Press System 7
 Then
 Then
 Press

Language

Choose the language in which to display FieldFox softkeys and other messages.
136
and
Next Page Previous Page
Use the ▲|▼ arrows to highlight a setting.
o
Then press Edit. The current setting changes to
o
Some settings require you to press a softkey to change the value. Otherwise, use
o
the numeric keypad, ▲|▼ arrows, or rotary knob to change the value.
When finished changing a value, press
o
When finished changing ALL preferences, press Done. All changes are
o
immediately saved as Preferences.
Setting
Language
Display Settings
Audio
Date and Time
GPS
CAT Distance Units
Battery Saver
Preferences
Save Current Settings
saved.
Reset Preferences
to view all settings.
yellow.
Done Edit
Learn more...
on page 136
on page 133
on page 132
on page 142
on page 139
on page 46
on page 137
There is a beep when your settings have been
to restore the factory default settings.
FieldFox User's Guide