Pulse Measurements Mode - Option 330
Pulsed power meter measurements, available with Option 330, are made with
Keysight U2020 X-Series USB Peak Power Sensors. These sensors are capable of
detecting, measuring, and storing data from a train of pulses at the RF input. This
data is queried from the USB Power Sensor and displayed on the FieldFox screen.
You can then analyze the data using several selectable settings.
In this Chapter
Zoom Window ..................................................... 131
Scale ................................................................... 132
Averaging ............................................................ 132
Resolution ........................................................... 134
Triggering ............................................................ 134
Marker Search .................................................... 137
Auto Analysis ...................................................... 137
Pulse Top ............................................................ 138
Grid ..................................................................... 138
Trace Memory ..................................................... 139
NOTE
Many of the features included with the FieldFox Pulse Measurements Mode are
discussed in detail in these two documents:
"Best Practices For Making The Most Accurate Radar Pulse Measurements":
Pulse Measurements Mode - Option 330
Keysight U2020 X-Series USB Peak Power Sensors Programmer's Guide:
http://literature.cdn.keysight.com/litweb/pdf//U2021-90003.pdf
129