Gps - Keysight N9912A User Manual

After a warning message, all options on the FieldFox are deleted.
NOTE
Delete All CFG Options

GPS

GPS (Global Positioning System) allows you to 'stamp' each data trace with your
physical position in latitude/longitude/elevation format. This can be useful when
making measurements on cell towers or other antennas at remote locations.
NOTE This feature is usable ONLY with the GPS receiver that is shipped with Microsoft
"Streets and Trips" and "AutoRoute" (versions 2010 and later). The GPS receiver is
NOT available from Keysight. Only the GPS USB receiver is used with the FieldFox.
Therefore, it is NOT necessary to purchase the very latest version of the map
software.
 GPS can be used in all FieldFox modes.
 Your GPS settings can be saved with Preferences. Learn more on page 174.
How to make GPS settings
 Press System 7
 Then
 Then
 Then choose from the following:
 The left portion of the screen shows satellites and the corresponding number on

178
System Configuration
GPS
- Disable GPS (default setting).
OFF
o
- Enable GPS using an external, customer-supplied, USB dongle
External
o
device. When enabled, a check is made to detect a USB GPS device at the USB
connectors. When a device is detected, a search is made for satellites overhead.
The GPS works best when outdoors and in full view of the open sky. When
several satellites are found, the following screen appears and is updated
frequently:
the adjacent Satellite Power chart.
Enable and disable the synchronization of the FieldFox
Sync Clock ON OFF
internal clock to the GPS UTC time standard.
is to be used by Service Personnel ONLY.
FieldFox User's Guide