Save And Reset Preferences - Keysight N9923A User Manual

System Settings
Preferences
— When finished changing ALL preferences, press Done. All changes are
— To exit the editing session without saving changes, press Esc at any time.
Learn more about these preference settings:
Setting (Learn more...)
"Global Settings (Overview)" on page 215
—
—
—
"Display Settings" on page 211
"Audio" on page 218
"Date and Time" on page 218
"GPS" on page 223
"File folders" on page 220
—
—
"CAT (Distance Units)" on page 220
"CAT/NA" on page 221

Save and Reset Preferences

All preference settings can be made at one time from the Quick Settings table.
All settings that can be saved as preferences (except Battery Saver and Startup
Mode) can also be made from individual softkey selections throughout the
FieldFox menu structure. However, they remain through a FieldFox shut down
ONLY when the current settings are saved as preferences.
The table above shows a list of all of these settings and where they are
discussed in this User's Guide.
214
—Use the arrows to highlight a setting.
Ed it. The current setting changes to yellow.
—Then press
—Some settings require you to press a softkey to change the value.
Otherwise, use the numeric keypad,
to change the value.
—When finished changing a value, press
immediately saved as Preferences.
"Language" on page 215
"Battery Saver" on page 216
"Startup Mode" on page 217
"Alpha Numeric Editing" on page 220
"File Saving Naming Options" on page 220
arrows, or rotary knob
Done Ed it.
Keysight N9923-90001 User's Guide