Keysight N9912A User Manual page 198

Certification and Compliance Statements
Certification
Keysight Technologies, Inc. certifies that this product met its published specifications
at the time of shipment from the factory. Keysight Technologies, Inc. further certifies
that its calibration measurements are traceable to the United States National
Institute of Standards and Technology, to the extent allowed by the Institute's
calibration facility, and to the calibration facilities of other International Standards
Organization members.
Manufacturer's Declaration
This product has been designed and tested in accordance with accepted industry
standards, and has been supplied in a safe condition. The documentation contains
information and warnings that must be followed by the user to ensure safe operation
and to maintain the product in a safe condition.
Declaration of Conformity
Should the Declaration of Conformity be required, visit:
http://www.keysight.com/go/conformity
198
'US', it indicates compliance to both Canadian and US
requirements.
NOM Mark (Normality of Mexico) indicates that the product was
tested by an accredited laboratory in Mexicao and meets Mexico's
safety requirements.
Japan's safety and EMC compliance mark.
China's safety and EMC compliance mark.
Taiwan's safety and EMC compliance mark.
Singapore's safety mark.
Korea's safety and EMC mark.
GOST, Russia's safety and EMC mark.
AC (Alternating Current).
Direct current (DC) equipment
CAUTION, risk of danger, refer to safety information in manual.
DC connector polarity
Dispose of properly
FieldFox User's Guide