Marker Format; Searching With Markers - Keysight N9912A User Manual

Marker Trace (SA Mode)
Marker Trace determines the trace number on which a marker resides. A marker is
created on, or can later be changed to, the trace number specified by the Marker
Trace selection. When changed, a marker moves to the same X-axis location on the
specified trace. Learn more about SA Traces on page 87.
How to move a marker between traces
 With two or more traces present, press Marker and Enter to create a marker. The
 Then
 Then select the marker to move using
 Then toggle

Marker Format

The Marker Format setting, available ONLY in NA Mode, allows you to choose the
format of the marker readout that appears in the upper-right corner of the screen
and in the marker table. The marker format can be independent of the trace format,
and can be set independently for each trace. All markers on a trace have the same
marker format.
How to choose marker format
 Press Marker
 Then
 Then
 Then choose from the following:
Data Analysis Features
marker is created on the current Marker Trace selection (default setting is 1).
More
Marker Trace 1,2,3,4
The selected marker is moved to the specified trace.
o
When a marker is moved to a 'blank' trace (not visible) the marker moves to the
same X-axis position at either the Y-axis position of the last data, or to the ZERO
position.
More
Marker Format
Selection
Same as displayed format
Default
Complex impedance format
R + jX
(3 rd number is distance for Time Domain)
Impedance Mag.
Z Magnitude
Phase
Real
More
Imaginary
Marker 1,2,3,4,5,6.
Example Y-axis value
22.8Ω -j61.4Ω
287.9fF
66.08Ω
73.8°
0.2003
-0.6727
151