Prefixes For Filenames; Printing - Keysight N9912A User Manual

 Press

Prefixes for Filenames

A prefix is used as a default filename to which characters can be added. The prefix
can be customized, and quickly enabled or disabled. When enabled, the current
prefix is automatically entered as the start of a filename when performing a Save
operation.
How to enable and disable the current Prefix
 Press Save/Recall 9.
 Then More.
 Then
How to edit the current Prefix
 Press Save/Recall 9.
 Then More.
 Then Prefix.
 Then choose from the following:
How to move the cursor
 Use the rotary knob to move cursor on the same row.
 Use the ▲|▼ arrows to move the cursor up and down the rows.
When the Prefix is complete
 Press
 Press

Printing

The current screen or selected files can be printed using a PCL-compatible printer
(like the older HP Deskjet printer) connected to one of the FieldFox USB ports. Newer
PCL3GUI photo and all-in-one printers are NOT supported.
Measurements can also be printed using the FieldFox Data Link software.
How to print the current screen or a saved file.
To save ink, first select an outdoor (white background) display color. Learn how on
page 173.
 Connect the printer to a FieldFox USB port. The print softkey will appear ONLY
168
to close the labeler without saving changes.
Cancel
The current selection is underlined.
Prefix ON OFF
Press to add the cursor character to the end of the Prefix.
Select
o
Press to erase the last character from the end of the Prefix.
Backspace
o
Press to erase the Prefix.
Clear
o
The preselected keywords (File, Site, and so forth) can be selected just like a
o
single character. These keywords can also be edited. See Edit Keywords.
to save the Prefix and close the labeler. This Prefix will exist on the
Done
FieldFox until it is changed.
to close the labeler without saving changes.
Cancel
when a compatible printer is connected.
FieldFox User's Guide