Multi-Trace Configurations
In NA Mode you can display multiple traces on the FieldFox screen.
A 3-trace configuration. Tr2 is the ACTIVE trace as indicated by the highlighted
Trace Setting Notes
The Frequency Range, IF BW, Resolution, Average, and Output Power settings are
All other trace settings, such as measurement, format, and limit lines, are applied
When creating markers, by default a marker is created on ALL traces as shown in
How to select a multi-trace configuration
Press Trace 6
Then
Then choose from the following:
How to activate a trace in order to change a setting
40
common for all displayed traces.
individually to the ACTIVE trace in the same manner as when a single trace is
present.
the above image. However, they can be created individually by disabling Coupled
Markers. Learn more on page 149.
Num Traces
The default measurements depend on the options that are installed.
1 trace standard configuration
x1
2 traces overlayed on a single graticule
x2
2 traces on separate horizontal graticules
x2H
3 traces on separate horizontal graticules
x3H
3 traces overlayed on a single graticule
X3
4 traces on separate graticules
x4
Tr 2
FieldFox User's Guide