Record Playback Example - Keysight N9912A User Manual

Record Playback Example

The following "Interval Recording" example shows how you can record spectral
activity over a longer period of time with less trace storage.
 Press Trace 6 then, with
 Then
 Then
 Then
 Then
 Then
 Then
 Then
 Then
 Then
This session can be played back into any Trace State. For example:
Play the Max Hold recording into a Clear/Write trace to see the data exactly as it was
recorded.
 Press Trace 6 then with
 Then
 Then
Play the Max Hold recording into a Max Hold trace to show the accumulation of "Max
Hold" activity over the entire recording.
 Press Trace 6 then with
 Then
 Then
Interference Analyzer (SA Mode) - Option 236
Copies the selected session to a different storage device, or the same
Copy
o
storage device with 'Copy_' appended to the beginning of the name.
Copies ALL of the listed sessions to a different storage device, or the
Copy All
o
same storage device with 'Copy_' appended to the beginning of the names.
Record Playback Setup
New Session
Recording Configuration
to Trace1
Record Source
to 10 s(seconds).
Record Interval
Back
Recorder Player
At the end of each 10 second record interval, the Max Hold trace is
Record
recorded and the Max Hold processing is reset for the next 10 second record
interval.
to end the recording.
Stop
Record Player
Play
Record Player
Play
= 1, press
Trace State
= 1 and press
Trace State
= 1 and press
Trace State
then
Max Hold
then
Clr/Wr
then
Max Hold
113