Keysight N9912A User Manual page 67

SA (Spectrum Analyzer) Mode
SA Mode measures signals at the RF IN port. The RF OUT connector is NOT used.
General purpose Spectrum Analyzer measurements are available with Option 230 or
231. SA measurements require NO calibration.
For a comprehensive SA Mode tutorial, see Spectrum Analysis Basics (App Note 150)
at
In this Chapter
Frequency Range .................................................. 68
Radio Standard ..................................................... 70
Channel Selection ................................................. 71
Scale and Units ..................................................... 72
External Gain ......................................................... 73
Attenuation and Preamp Control ......................... 73
Check for Compressed Measurements ................ 74
Field Strength Measurements .............................. 75
Tune and Listen .................................................... 78
Independent Source ......................................... 8078
Resolution Bandwidth........................................... 81
Video Bandwidth ................................................... 81
Sweep Type ........................................................... 82
Sweep Acquisition ................................................ 82
Very Long Sweep Times ....................................... 83
Zero Span Measurements .................................... 83
SA (Spectrum Analyzer) Mode
http://literature.cdn.keysight.com/litweb/pdf/5952-0292.pdf
arrier with 5 kHz frequency modulation and deviation of 1 kHz
C
SA display with markers
67