Keysight N9912A User Manual page 76

Using the Antenna/Cable Editor
The Antenna Editor and the Cable Editor menus are identical. Both tables include
header information, and a Frequency/Value table.
NOTE The FieldFox limits Antenna and Cable correction to a maximum of 90 values.
FieldFox Antenna Editor
How to use the Antenna/Cable Editor
 Press
 Then
 Then use the ▲|▼ arrows to select a field,
 Optionally choose from the following:
76
Apply Corrections ON OFF
o
Turn ON and OFF Antenna correction.
Antenna ON OFF
o
Edit/Save/Recall Antennas
o
below.
Turn ON and OFF Cable correction.
Cable ON OFF
o
Edit/Save/Recall Cables
o
View Corrections ON OFF
o
corrections.
then to clear all data from the existing Antenna or Cable table and
New Yes
reset header information to default settings.
or
Edit Antenna
When editing Header information, press
o
using the FieldFox labeler.
When editing Frequency/Value pairs, enter numbers using the numeric keypad,
o
and a frequency suffix when necessary. Then Enter. Positive Values are
interpreted as LOSS for both Cable Loss and Antenna Gain Factor. Learn more
about "How the Freq/Value pairs are applied" below.
Previous / Next Page
o
Add a blank Freq/Value pair to the table,
Add Data
o
then:
Delete/Clear
o
Turn ON and OFF correction for all settings
Recall or edit an Antenna Correction table. See
Recall or edit a Cable Correction table. See below.
Turn ON and OFF
to open the Antenna / Cable Editor.
Edit Cable
Edit
Quickly scrolls through pages of Freq/Value data.
Red Trace - Antenna/Cable
then modify the selected field
FieldFox User's Guide