Keysight N9912A User Manual page 17

Top Panel
Caption Description
RF OUT For CAT and NA measurements, use to make reflection
measurements. Maximum: ±50 VDC, +23 dBm RF
Ext Trig/Ext Ref External Reference connector to connect to an external frequency
reference. Maximum: 5.5 VDC.
RF IN For CAT and NA mode, use to make transmission measurements.
For SA use to make all measurements.
Maximum: ±50 VDC, +27 dBm RF.
Side Panel
Caption Description
Ethernet cable connector to read trace data using the FieldFox Data Link
Software.
Download the latest version of the software at
http://www.keysight.com/find/fieldfox
Reserved for future use.
DC power connector used to connect to the AC/DC adapter. Maximum: 19
VDC, 4 ADC.
Micro Secure Digital slot. Use to extend the memory of the FieldFox.
Standard USB connector used to connect a power sensor for Power Meter
Mode. Also used to save files to a USB flash drive.
Use of Keyboard and Mouse is NOT supported.
Audio output jack for use with SA Mode Tune and Listen.
Preparing for Initial Use of Your New FieldFox
Learn More
CAT Mode on page 20
NA Mode on page 38
Ext Ref on page 180.
Ext Trig (SA Mode) on
page 85
SA Mode on page 67
Learn More
On page 12
File locations on page
162
File locations on page
162
On page 78
17