Keysight N9912A User Manual page 50

Big Marker Display States (A and B)
This feature, available ONLY in NA Mode, allows you to view up to three Big or Super
Big marker readouts. This is done by using up to two different display states called A
and B. Each display state is comprised of the settings listed below. When the Big
Readout setting is toggled through A and B, these display states are recalled.
How to create Big Marker Display States
To have big readouts, markers MUST be created using the following procedure.
If you have already set up your display and do not want to lose it, then save the
current state to a state file. Learn how on page 162. The following procedure will
overwrite your display state.
 Press Mkr ->/ Tools
 Then
 With A or B selected, then press
 Then edit the following display state settings:
 Num Traces – Choose the Multi-Trace configuration x1, x2, or x3. Only Overlayed
 Font Size – Choose either Big or Super Big. Super Big marker readout #3 will cover
 Trace Settings - For each possible trace (1, 2, and 3) select from the following:
 Big Readout - For each marker readout (1, 2, and 3), select from the following:
50
Big Readout
A or B - The A or B display state is recalled. If none have been defined, then the
o
default display state is recalled.
OFF - The B display state is visible but without the Big Marker Readout.
o
configurations are allowed. Learn more on page 40.
some of the measurement grid.
Measurement – S-Parameter or Receiver measurement to display. S11 is
o
default. Learn more on page 39.
Meas Format – Log is default. Learn more on page 42.
o
Bandwidth (ON) – Marker readout for marker bandwidth search. OFF is default.
o
Learn how to set BW parameters on page 152.
Marker # - Enter a number from 1 to 6 to create the marker. 1 is created by
o
default.
Trace # - The marker# is created on this trace. Tr1 is selected by default. The
o
corresponding Num Traces must first be selected. For example, to create a
marker on Trace 3, first select Num Traces = x3.
Format – Format for the marker readout. Select Default to make the marker
o
readout format the same as the display format. Default is selected by default.
Mkr Tracking – ON: Select the parameter to track on the standard Marker
o
Search menu. OFF is selected by default. When set to ON, Peak tracking is set
by default. Learn about Marker Tracking on page 152.
State – Choose from Normal, Delta, or OFF. The default marker (1) is created in
o
Normal. Learn more on page 148.
Enabled – Turns the Big Readout of the corresponding marker ON and OFF. The
o
default marker (1) is set ON by default.
Edit Big Marker (A or B)
FieldFox User's Guide