Occupied Bandwidth - Keysight N9912A User Manual

 Enter a value between 100 Hz and 3 GHz using the numeric keypad, ▲|▼ arrows,
 Press Enter
Other Channel Power Settings
All relevant FieldFox settings are made automatically to ensure the highest accuracy,
such as ResBW, VideoBW, and sweep (SwpAcquisition) speed. These, and all other
SA Mode settings, can be changed manually in a Channel Power measurement.
 Learn about Measurement Preset on page 94.
 Learn about Averaging on page 94.
 Learn about RRC Weighting on page 100.

Occupied Bandwidth

Occupied Bandwidth measures the power of the displayed frequency span and
displays vertical posts at the frequencies between which the specified percentage of
the power is contained. The frequency span between the two vertical posts is the
Occupied Bandwidth. The Occupied Power, the power that is contained between the
two posts, is also displayed in dBm.
How to select Occupied Bandwidth
 Press Measure__1
 Then
 Then
When Occupied Bandwidth is selected, the following settings are maintained from a
previous measurement: Center Frequency, Preamp ON|OFF, and RF Attenuation.
96
or the rotary knob.
OBW measurement; Chan 190 Downlink; GSM850 Radio Standard
Channel Measurements
Occupied BW
FieldFox User's Guide