Starting/Stopping The Pump With The Lcd Controller - EBARA ESA70W Instruction Manual

6.6 Starting/stopping the pump with the LCD controller

Maximum two LCD controllers can be connected. Note only one of them can
start and stop the pump (the other shows the pump operational statuses).
The controller of which LED "LOCAL" is lit on has precedence over the other to
control the start and stop operation.
If only one controller is connected, the controller starts and stops the pump.
START/STOP
When you use two controllers, disconnect the one which you will not use for the
operation from the pump once. Then, attach it again.
One controller
connected
Allowed
Two controller connected
The one with its LED
"LOCAL" lit on is allowed.
EBARA
(41)
Corporation