Inserting Power Supply Line In Section/Curve Module - Bosch Rexroth ActiveMover Assembly Instructions Manual

86/172 Assembly
1. Remove the caps.
2. Install the cable glands.
3. Insert the power
supply cable through
the cable gland.
4. Tighten the cable glands.
Bosch Rexroth AG, MIT: ActiveMover, 3 842 559 521/2018-07
7.6.3

Inserting power supply line in section/curve module

1
2
1
Fig. 61: Inserting power supply line in section/curve module
2
4
3
557 186-61