Table of Contents
Advertisement
10/172
Safety instructions
Bosch Rexroth AG, MIT: ActiveMover, 3 842 559 521/2018-07
2.4 Personnel qualifications
The activities described in this document require basic knowledge of mechanical
and electrical principles, as well as knowledge of the appropriate technical terms.
Additional knowledge of how to use lifting gear and the appropriate slings is
required for transporting and handling the product. To ensure safe use, these
activities should only be performed by a specialist or a person under the direction
and supervision of a specialist.
"Specialist" refers to someone who can recognize possible hazards and take
the appropriate safety measures given his/her technical training, knowledge and
experience, and knowledge of relevant regulations. A specialist must follow with the
relevant rules specific to his/her occupation and have the necessary expertise.
Bosch Rexroth offers training support in specific areas. You can find an overview
of the training content online at: http://www.boschrexroth.de/didactic.
2.5 General safety instructions
• Observe applicable accident prevention and environmental protection regulations.
• Observe the safety rules and regulations of the country in which the product is
being used.
• Only use Rexroth products that are in proper working order.
• Observe all the notices on the product.
• Persons who assemble, operate, disassemble or maintain Rexroth products should
not be under the influence of alcohol, drugs or medication that may affect their
ability to respond.
• Only use original accessories and spare parts by Rexroth to prevent putting others
at risk due to unsuitable spare parts.
• Observe the technical data and ambient conditions specified in the product
documentation.
• Only start up the product if it has been determined that the end product (e.g. a
machine or system) into which the Rexroth products have been installed complies
with country-specific regulations, safety regulations and application standards.
Advertisement
Table of Contents
