Table of Contents
Advertisement
Required spare parts
• Curve module V-rail
1.
Remove the V-rails from
both adjacent section
modules (see
Section 10.4.11).
2.
Remove the left and
right measuring system
sensor units
(see Section 10.4.24).
3.
Remove the protective
cover from the curve
module.
4.
Remove the fastening
screws (11x) from the
V-rail.
5.
Pull the V-rail up and off.
6.
Clean the top of the
curve module with a soft
cloth.
7.
Install the V-rail in
reverse order.
8.
If necessary, align the
V-rail (see Section 7.5.8).
9.
Calibrate the measuring
system sensor units
(see Section 10.5).
10.4.12 Replacing the V-rail (curve module)
3
4
5
Fig. 87:
Replacing the V-rail (curve module)
Maintenance and servicing 127/172
3 842 559 521/2018-07, MIT: ActiveMover, Bosch Rexroth AG
557 186-87
Advertisement
Table of Contents
