Dc Power Supply X1S Power - Bosch rexroth RegisterControl ATEX MLC 14VRS Operating Instructions Manual

16/39
Interfaces
NOTICE
Disconnect the power supply before attaching or loosening connections!
Only the cables provided by Bosch Rexroth as accessories may be
used to connect the PY-MSS01.1-T1 mark stream sensor.
9.2 24 V DC power supply X1S power
All internally required voltages are generated with electrical isolation via a
DC/DC converter. The connection is an 8-pin M12 circular connector.
Fig. 9-2: Connection lead at X1S Power
Pin Color
1 White
2 Brown
3 Green
4 Yellow
5 Grey
6 Pink
7 Blue
8 Red
Tab. 9-2: Pin assignment of X1S power
The PY-MSS01.1-T1 mark stream sensor is reverse polarity-protec-
ted. A reverse polarity of the 24 V power supply to X1S Power does
not damage the device.
Bosch Rexroth AG R911341913_Edition 05
Plugging or removing connections under voltage
can damage the mark stream sensor!
Function
0 V, feeding power supply
+24 V, feeding power supply
Differential signal of high-speed input 1 + (HSI1+)
Differential signal of high-speed input 1 - (HSI1-)
Differential signal of high-speed output 1 + (HSO1+)
Differential signal of high-speed output 1 - (HSO1-)
Differential signal of high-speed output 2 + (HSO2+)
Differential signal of high-speed output 2 - (HSO2-)
MLC 14VRS RegisterControl ATEX