78/172
Assembly
5.
Pull off the protection
plate.
6.
Hold the remover tool
firmly with both hands
and set the left end of
the workpiece pallet on
the module.
7.
Tilt the workpiece pallet
right onto the section or
curve module.
8.
Detach the remover tool.
9.
Check the spacing of
the measuring system
(encoder and magnetic
strip), see Section 10.5.1.
Disassemble in reverse
order.
Bosch Rexroth AG, MIT: ActiveMover, 3 842 559 521/2018-07
6
8
Fig. 55:
Mounting workpiece pallet (2)
9
7
5
557 186-55