124/172 Maintenance and servicing
Required spare parts
• Flat guide roller (2x)
3 842 555 983
1.
Remove the WT from
the ActiveMover
(see Section 7.5.10).
2.
Set the protection plate
on the magnet kit with
the plastic cover on.
3.
Loosen the lock screws
in the guide rollers.
4.
Remove the axles from
the guide rollers.
5.
Remove the guide rollers
and washers.
6.
Install the new guide
rollers and washers
(2 per guide roller) in
reverse order.
Bosch Rexroth AG, MIT: ActiveMover, 3 842 559 521/2018-07
10.4.9
Replacing guide rollers (flat)
4
Fig. 84:
Replacing guide rollers (flat)
2
3
2x
3
SW
5
5
557 186-84