Table of Contents
Advertisement
Required spare parts
• Magnet kit (2 magnets)
3 842 555 979
• Magnet kit (3 magnets)
3 842 555 980
1.
Remove the WT from
the ActiveMover (see
Section 7.5.10).
2.
Set the protection plate
on the magnet kit with
the plastic cover on.
3.
Remove the front plate
of the WT.
4.
Remove the magnet kit.
Please note:
• The kit with 2 magnets is
fastened with 2 screws.
• The kit with 3 magnets is
fastened with 4 screws.
5.
Install the new magnet
kit and the front plate in
reverse order.
10.4.8
Replacing the magnet kit
2
Fig. 83:
Replacing the magnet kit
Maintenance and servicing 123/172
2x
4
SW
3 842 559 521/2018-07, MIT: ActiveMover, Bosch Rexroth AG
3
2x
SW
4x
SW
4
557 186-83
Advertisement
Table of Contents
