Table of Contents
Advertisement
76/172
Assembly
Bosch Rexroth AG, MIT: ActiveMover, 3 842 559 521/2018-07
7.5.10
Mounting/removing workpiece pallets
Strong magnetic field!
Risk of injury from strong magnetic fields in areas marked with this hazard
symbol.
Workpiece pallets generate a strong magnetic field when they are not
mounted to the linear motor system.
- This strong magnetic field can be harmful to persons with pacemakers and
other medical implants.
- The magnetic field of the ActiveMover linear motor system can cause
magnetic materials to move, which may result in flying objects or crushing/
dismemberment.
- Electronic equipment and magnetic data carriers can be affected by the
magnetic field.
Persons with pacemakers or other medical implants should maintain a min.
„
distance of 30 cm between the implant and the workpiece pallet.
Persons with pacemakers or other medical implants should not perform
„
maintenance on or service the product.
Keep metallic objects away from the workpiece pallets and the section/curve
„
modules.
„
When workpiece pallets are unmounted, keep their protection plates on them.
For attachment instructions, see Page 77.
Also follow the safety instructions in Section "General safety instructions for
„
magnets" on page 33.
Injury from workpiece pallets suddenly releasing during removal
Removing the workpiece pallet requires a considerable amount of force even with
the remover tool. Once the magnetic pull strength is overcome, the workpiece
pallet will release suddenly.
Only use the included remover tool.
„
Always hold the remover tool with both hands.
„
Secure your footing to keep from falling backward.
„
Be prepared for the workpiece pallet to release suddenly.
„
Risk of crushing when mounting/removing workpiece pallets
The other workpiece pallets near the remover tool pose a risk of hands and fingers
being crushed.
Remove all workpiece pallets near the remover tool.
„
Crushing injury when placing the protection plate on the magnet kit of the WT!
The high magnetic pull strength will suddenly pull the protection plate toward the
magnet kit as it approaches it.
Be prepared for the high pull strength.
„
Set the protection plate on the magnet kit with the plastic cover on.
„
„
Do not put any body parts between the protection plate and the magnet kit.
CAUTION
Advertisement
Table of Contents
