Connecting Ground And Power Cables (28 V) (From Left Section/Curve Module) - Bosch Rexroth ActiveMover Assembly Instructions Manual

Please note:
• Connecting to an adjacent
curve module is the
same as connecting to an
adjacent section module.
• See the circuit diagram
included in the scope
of delivery for more
information on electrical
connections.
1. Connect the grounding
cable (YE/GN) to the
housing (F).
2. Connect the power
cable (28 V DC, blue) to
Terminal G.
Connect the power cable
3.
(0 V, blue/white) to
Terminal H.
7.6.4 Connecting ground and power cables (28 V) (from left section/curve
module)
50
F G H
Fig. 62: Connecting ground and power cables (from left section/curve module without power
supply connected)
3 842 559 521/2018-07, MIT: ActiveMover, Bosch Rexroth AG
Assembly 87/172
557 186-62