Table of Contents
Advertisement
17.
Check that the fronts of
both section modules
are flush.
18.
Use a precision level to
make sure both section
modules are level, plumb
and square.
Please note:
If the section modules not
be properly aligned, recheck
the alignment of the base
frame and the mounting
dimensions for the section
module in Fig. 35.
If necessary, repeat/check
the entire assembly.
Fig. 38:
Checking section module alignment
18
= 0,02 mm/m
3 842 559 521/2018-07, MIT: ActiveMover, Bosch Rexroth AG
Assembly
61/172
17
557 186-38
Advertisement
Table of Contents
