Table of Contents
Advertisement
50/172
Assembly
Table 5: Symbols used
1
2
SW13
M
= 20Nm
D
SW5
M
= 8Nm
D
No-Tox
HD
®
Food Grade
5 ... 10
Oil 46
1
2
3
A
B
C
X
Bosch Rexroth AG, MIT: ActiveMover, 3 842 559 521/2018-07
7.4 Symbols used
Connection with T-bolt and flange nut.
Make sure the T-bolt is in the correct position when inserting into and tightening in
the slot. The notch at the head of the T-bolt indicates its orientation.
1 = T-bolt insertion position in the slot
2 = T-bolt clamping position in the slot
Tightening torque: 25 Nm
Hex wrench
AF = width across flats [mm]
M
= required tightening torque [Nm]
D
Hex key
AF = width across flats [mm]
M
= required tightening torque [Nm]
D
Lubricate/lubricate with specific oil:
• No-Tox® HD Food Grade Oil 46 (www.belray.com)
Parts marked with this symbol are not required for the described assembly.
Dispose of them or use them for other purposes.
Graphic order of the assembly steps.
The numbers correspond to the order of the assembly steps in accordance with
the instructions in the accompanying text.
Identification of components in illustrations.
The letters identify the components mentioned in the accompanying text.
Detail view from a different direction, e.g. the back or the bottom of the product.
Advertisement
Table of Contents
