Table of Contents
Advertisement
Injury from workpiece pallets suddenly releasing during removal
Removing the workpiece pallet requires a considerable amount of force even with
the remover tool. Once the magnetic pull strength is overcome, the workpiece
pallet will release suddenly.
Always hold the remover tool with both hands.
„
Secure your footing to keep from falling backward.
„
Be prepared for the workpiece pallet to release suddenly.
„
Risk of crushing when mounting/removing workpiece pallets
The other workpiece pallets near the remover tool pose a risk of hands and fingers
being crushed.
„
Remove all workpiece pallets near the remover tool.
Crushing injury when placing the protection plate on the magnet kit of the WT!
The high magnetic pull strength will suddenly pull the protection plate toward the
magnet kit as it approaches it.
Be prepared for the high pull strength.
„
Set the protection plate on the magnet kit with the plastic cover on.
„
Do not put any body parts between the protection plate and the magnet kit.
„
Risk of destruction of electronic components/PCBs by ESD
„
Always wear an anti-static wristband to prevent electrostatic charging when
working on electronic components/PCBs.
Maintenance and servicing 117/172
CAUTION
NOTICE
3 842 559 521/2018-07, MIT: ActiveMover, Bosch Rexroth AG
Advertisement
Table of Contents
