Table of Contents
Advertisement
Required spare parts
• Power supply PCB
3 842 555 967
1.
Remove the protective
cover from the curve
module.
2.
Disconnect the 2 ribbon
cables from the PCB.
3.
Disconnect the 5 coil
plugs.
4.
Remove the PCB
(1 plastic screw +
13 metal screws).
5.
Remove the PCB and
disconnect the 3
thermistor plugs.
6.
Check that all 10 fuses
(15 A) are present on the
new PCB.
Install the new PCB in
„
reverse order.
10.4.17 Replacing the power supply PCB (curve module)
1
2
3
Plastic
Fig. 93:
Replacing the power supply PCB (curve module)
Maintenance and servicing 133/172
4
5
3 842 559 521/2018-07, MIT: ActiveMover, Bosch Rexroth AG
557 186-93
Advertisement
Table of Contents
