WT components
V-rollers
10.2.2
Control cabinet fan
Inspect the control cabinet fan for damage, loose connecting cables, dust and
fouling at least once per month. For cleaning the fan, see Section 10.1.5.
10.2.3
Control cabinet air filter
Inspect the control cabinet air filter for dust and fouling at least once per month.
10.2.4
Control cabinet power supply
Inspect the control cabinet power supply for dust and fouling at least once per
month. For replacing the air filter, see Section 10.4.25.
10.2.5
All screws
Inspect all ActiveMover components for loose fastenings and screws at least once
per month.
Maintenance and servicing 113/172
Inspections
Check the vertical play of the
guide rollers.
Check the guide rollers for
damage and sticking.
3 842 559 521/2018-07, MIT: ActiveMover, Bosch Rexroth AG
Further work
Tighten any loose fastening
screws.
If the guide rollers are
damaged, also check the V-rail
for damage.
Replace the guide rollers,
if necessary
(see Section 10.4.10/10.4.12).
Replace the V-rail, if necessary
(see Section 10.4.11/10.4.12).