X:
Front view
Y:
Rear view
1.
Remove the protective
cap from the cable
socket in the back of the
electronic box on the
right of the IR reading
head.
2.
Insert the connecting
cable for the IR reading
head into the electronic
box and install the cable
gland.
3.
Connect the connecting
cable for the IR reading
head to the PCB
(gateway).
7.6.9
ID system IR reading head (optional)
Fig. 66:
Connecting ID system IR reading head (optional)
X
1
2
Y
3 842 559 521/2018-07, MIT: ActiveMover, Bosch Rexroth AG
Assembly
91/172
3
557 186-66