Table of Contents
Advertisement
162/172 Maintenance and servicing
Please note:
• The WT mount is required
to adjust/calibrate
mounting/machining
operations on the WT.
• Improper use of the WT
mount can damage the WT
and ActiveMover.
• Remove all WT mounts
before start-up.
A:
Knurled thumbscrew
B:
Mounting support
C:
WT mounting
D:
Knurled thumbscrew
1.
Mount the mount
support (B) on a section
module.
2.
Position a WT under a
mount support.
3.
Place the WT mount (C)
on the support.
4.
Tighten the top knurled
thumbscrews (A) in
order to connect the WT
mount to the support.
5.
Tighten the knurled
thumbscrew slightly. The
knurled thumbscrew has
a friction clutch.
Disassemble in reverse
„
order.
Bosch Rexroth AG, MIT: ActiveMover, 3 842 559 521/2018-07
10.5.9
Installing/removing the WT mount (optional)
Fig. 122:
Installing/removing the WT mount
A
C
1
2x
B
SW
M
= Nm
D
2
A
4
D
B
D
C
3
5
557 186-122
Advertisement
Table of Contents
