Table of Contents
Advertisement
Follow the 5 safety rules when working on the electrical system
Disconnect from power.
„
Secure against restarting.
„
Verify the system is dead.
„
Ground and short-circuit the system.
„
Cover or shield adjacent live parts.
„
• Choose control and sensor elements that comply with EN ISO 13849. Factor in the
load being transported and the transport speed.
• Only qualified personnel should implement electrical connections.
• Observe DIN EN 60204-1 or the equivalent regulations in your country.
• Observe the established line voltage.
• Observe the electrical ratings on the nameplate, see Fig. 27 on page 48.
• Observe the circuit diagram included in the scope of delivery.
NOTICE
3 842 559 521/2018-07, MIT: ActiveMover, Bosch Rexroth AG
Assembly
83/172
Advertisement
Table of Contents
