Table of Contents
Advertisement
Please note:
Improper handling can bend
the discharger brushes and
it will no longer be possible
to install them.
Required spare parts
• Discharger brush (2x)
3 842 550 985
1.
Remove the WT from
the ActiveMover
(see Section 7.5.10).
2.
Set the protection plate
on the magnet kit with
the plastic cover on.
3.
Remove the discharger
brushes.
4.
Align the discharger
brushes with the outer
holes in the tip guard.
5.
Install the fastening
screws for the discharger
brushes and tighten
them.
10.4.4
Replacing discharger brushes
2
Fig. 79:
Replacing discharger brushes
Maintenance and servicing 119/172
4x
3
SW
4x
5
4
SW
M
= Nm
D
3 842 559 521/2018-07, MIT: ActiveMover, Bosch Rexroth AG
557 186-79
Advertisement
Table of Contents
