Table of Contents
Advertisement
Please note:
• The bus protocol
for the connection
module depends on
the customer's order
(e.g. EtherNET/IP™,
PROFINET®, etc.).
• The connecting cable for
the PLC connection (A) is
not included in the scope
of delivery.
• To change the rotary
switch settings, proceed
as follows:
– Turn off the main switch
on the control cabinet.
– Change the rotary switch
settings.
– Turn on the main switch.
1.
Insert the connecting
cable through the cable
gland in the back of the
control cabinet (B).
2.
Connect the PLC
according to the circuit
diagram.
3.
Configure the rotary
switch as shown in the
illustration.
A:
PLC connection
B:
Cable socket
7.6.16
PLC
2
A
Fig. 74:
PLC connection
C
B
0 x 16
4
C
B
0 x 1
4
3 842 559 521/2018-07, MIT: ActiveMover, Bosch Rexroth AG
Assembly
99/172
1
B
557 186-74
Advertisement
Table of Contents
