Table of Contents
Advertisement
Required spare parts
• Section module coil cover
3 842 554 510
• Curve module coil cover
3 842 554 516
Please note:
The cover is glued to the
coil but can be removed.
1.
Pull the cover off the coil.
2.
Clean any adhesive
residue off the coil, e.g.
with isopropyl alcohol
(IPA).
3.
Remove the protective
film from the back of the
new cover.
4.
Put the cover on the
top corner of the coil
and press the cover on
carefully from top to
bottom.
5.
Press out any air bubbles
from the inside out.
10.4.14 Replacing the coil cover (section/curve module)
Fig. 89:
Replacing the coil cover (shown here on a section module)
Maintenance and servicing 129/172
3 842 559 521/2018-07, MIT: ActiveMover, Bosch Rexroth AG
557 186-89
Advertisement
Table of Contents
