Table of Contents
Advertisement
Required spare parts
• Lubricating felt
3 842 555 984
1.
Remove the WT from
the ActiveMover
(see Section 7.5.10).
2.
Set the protection plate
on the magnet kit with
the plastic cover on.
3.
Remove the fastening
block from the
lubricating felt holder.
4.
Remove the lubricating
felt holder.
5.
Remove the lubricating
felt.
6.
Install the new
lubricating felt in reverse
order.
7.
Lubricate the WT
(see Section 10.3.1).
Please note:
The V-groove in the felt
should be arranged
horizontally in the V-rollers.
10.4.6
Replacing the felt (WT lubricating device)
Fig. 81:
Replacing the felt (WT lubricating device)
Maintenance and servicing 121/172
4
PH2
2
3 842 559 521/2018-07, MIT: ActiveMover, Bosch Rexroth AG
5
2x
3
SW
M
= Nm
D
557 186-81
Advertisement
Table of Contents
